Installing drywall can not only enhance the beauty of a room, but also add insulation which can lower your heating bill. Many people describe the practice of drywall finishing as more of an art than a renovation or construction project. Drywall finishing is one of the most important parts of installing drywall. For instance, if not properly finished, the drywall can look unattractive, messy, and not properly aligned. If you are planning to do a drywall finishing project yourself, the following are techniques you can use to make sure your project comes out looking beautiful.
- You should make sure that the Kings Drywall panels are accurately attached to the support structure. Use long sturdy nails, even two sets of nails, so that the panels are well secured to the structure. Make sure the nail heads are embedded in the panels so that it is easy to cover them with compound. Be careful when you nail so that you don’t accidentally hit the panel and causes dents. If you do, you will still be able to conceal it with joint compound fill.
- The two types of tape you can use on the drywall are fiberglass-mesh tape and paper tape. Because it has its own adhesive, you can put fiberglass mesh tape directly on the drywall. The paper tape is placed over the joint compound.
- The two types of drywall compound you can use are either powdered that you mix yourself, or a premixed container. Premixed is much easier to use as it allows you to place a consistent material that is not too thick or too loose. When you stir the mixture, do not stir it too much to avoid getting air bubbles on the covered joints.
- The small section between the drywall will create a compression. To create a smooth and even surface that matches the rest of the panels, you have to apply the mixture over the compression or joint. First, spread a thin layer over the area and lay the tape over it. Make sure it is smooth and not over lapping. One you have it even and smooth, apply a second thin layer over the taped surface. Smooth it while making sure there are not tape pieces sticking up. You have to repeat this application for each joint. Apply it using a trowel or drywall knife. Then, leave it to dry. It is better if you let it dry over night. After it dries, you can gently sand the area so it is smooth and even with the rest of the panel. Make sure there are no compound dust particles remaining. As well, wear a mask when you are sanding so you do not inhale any particles. If you are not satisfied with the result, you can apply another thin layer and repeat the process.
Poor drywall finishing can make a room look grungy and unappealing. It is important to take your time to make sure you are pleased with the final result, especially when finishing the corners. If you use the proper drywall finishing techniques, you will end up with a beautiful dry wall installation that you can enjoy for years.
Get all your stucco, textures and patterns ceiling repairs & Painters Toronto requirements met with this Toronto business firm. With over 25 years of experience, get impeccable quality service at an affordable price. Call now for your Drywall Toronto needs!